3-Channel DVI Extender - Installation and Operation Manual
17
CONFIGURATION
VIDEO INPUT
The VIDEO OSD menu is subdivided into seven sections. With the exception of the
fi
rst item (VIDEO INPUT), this sub-menu contains settings for analog signals.
The top section of the VIDEO INPUT window shows the three video formats
available for the input signals.
Column S shows the input signal type:
a = analog
d
=
digital
g
=
sync
on
green
c
=
composite
sync
The video signal transmitted can be selected in the bottom section of the window.
VGA Analog
signal
DVI Digital
signal
VGA / DVI
Automatic selection: if both an analog and a digital signal
are available, the analog VGA signal is transmitted.
If only DVI is available, DVI is transmitted.
IMPORTANT NOTE:
Please observe the effect your settings in the OSD menu have on your
video output devices.
If the output device is at a very remote location and no one is available to help you to
observe the changes, you can also connect the output device directly to the respective
DVI OUT port of your 3-Channel DVI Extender TX transmitter unit.
