LIST OF PARTS
1. Handle
2. Top electric cord storage holder
3. Detachable rod handle
4. Power cord
5. Air outlet openings
6. Dust cup
7. Dust filter (inside dust cup)
8. Unlocking button for dust cup
9. On/Off switch
10. Rod handle connector
11. Bottom electric cord storage holder
12. Crevice accessory
13. Floor nozzle attachment
14. Suction opening
15. Handheld vacuum unit
ASSEMBLY
Conversion from handheld to floor vacuum cleaner
Remove all parts from the packaging and place carefully on a flat
area. If necessary, put protective sheeting underneath to avoid
harm to easily damaged surfaces. Carefully remove all packing
materials. Compare the contents with the list of parts.
Using as a handheld vacuum cleaner
The 2 in 1 Vacuum Cleaner is ready for use as a handheld
appliance as soon as it has been unpacked.
Using as a floor vacuum cleaner
1. Open the little flap on the handle of the handheld vacuum unit.
2. Insert the rod handle connector in the opening in the handheld
vacuum unit and push in as far as it will go.
3. Press the flap against the connector so that it snaps into place.
Removing rod handle
4. Open the flap.
5. Pull out the rod handle.
6. Close the flap on the handle again.
4
15
Summary of Contents for VSC02A861
Page 2: ......
