ACCESSORIES
FITTING AND REMOVING NOZZLES
CAUTION
Before changing nozzles, always switch the
vacuum cleaner off first.
When fitting nozzles, insert in the suction
opening.
To remove nozzles, pull out of the suction
opening.
FLOOR NOZZLE ATTACHMENT
The floor nozzle attachment
is suit able for both carpets
and smooth floors.
CREVICE ACCESSORY
CAUTION Risk of injury!
Never hold the crevice
nozzle close to the body
or it may stick to the skin.
If the nozzle does get
stuck, set the On/Off
switch to immediately.
The crevice accessory is designed for
upholstery, cleaning the interior of cars and
for getting into all corners and cracks that
are inaccessible with the floor nozzle
attachment or without a nozzle.
PREPARING TO USE
THE APPLIANCE
CAUTION
Only switch the vacuum cleaner on once
you have checked that all parts are fully
assembled and all filters correctly inserted.
Under no circumstances should the
appliance be used on the following:
– liquids or wet materials (e. g. carpet
shampoo when wet)
– glowing ash, cigarette ends, matches etc.
– combustible or in flammable substances
– very fine dust (e. g. concrete dust) or toner
– hard, pointed objects such as large
splinters of glass
1. Fit or remove the rod handle
depending on whether you
want to use the vacuum
cleaner as a handheld or a
floor appliance.
2. You can use the vacuum
cleaner either without a
nozzle or fit one of the nozzles
to the suction opening.
3. To quickly unwind the
cable from the floor vacuum
cleaner, twist down the cord
holder on the top handle.
4. Insert the power plug in a
wall outlet.
5. Set the On/Off switch to (on).
6. Move the suction opening or nozzle over
the surface to be cleaned.
7. After finishing vacuuming, set the On/Off
switch to and unplug.
8. After use, always empty the dust cup and
clean the dust filter.
CLEANING
CAUTION
Remove the power plug before cleaning
and / or putting away.
Do not use caustic or abrasive products to
clean the housing or you may damage the
surface.
Never immerse the appliance in water
EMPTYING DUST CUP AND CLEANING DUST
FILTER.
1. Hold down the unlocking
button for the dust cup and
carefully remove.
2. Hold the dust cup over a
dust- bin,carefully remove
the dust filter and empty the
dust cup.
3. Tap the dust filter gently.
4. Occasionally wash the
dust filter under cold running
water.
CAUTION: Do not wash the dust filter in
the washing machine.
5. Leave the dust filter to dry in the air for 24
hours until completely dry before reinserting.
CAUTION: Never use a hair dryer.
6. Press the dust filter firmly
back into the dust cup so it
fits closely all round the wall
of the dust cup housing.
CAUTION: Never use the vacuum
cleaner without the dust filter inserted.
5
!
●
●
!
!
•
•
i
O
!
•
•
•
!
!
!
Summary of Contents for VSC02A861
Page 2: ......
