Black & Decker PIUSB, Instruction Manual

Page: 15 / 72

Protective Features
The charger monitors the following conditions:
Low Battery Voltage — This condition is not harmful to
the charger, but could damage the power source, so the
inverter will automatically shut down when input voltage
drops below 10.5 +/- 0.5 volts DC. The charger will
automatically reset when the voltage improves to 11.5V.
Overload/Short Circuit Protection — The charger will
automatically shut down when a short circuit occurs. A
reverse polarity or short circuit condition may cause
external or internal fuses to open and may cause
irreversible damage to the appliance
Notes: The Power/Fault LED Indicator will light
red to indicate a Fault condition before
automatic shutdown occurs.
If unit shuts down, to restart it you must
remove it from the power source, wait for
a few seconds and then re-insert the unit
into the power source.
15