Black & Decker PIUSB, Instruction Manual

Page: 14 / 72

4. The Power/Fault LED Indicator (3) will light green, indi-
cating a proper connection. If the Power/Fault LED
Indicator lights red, a Fault condition exists. Refer to
the Troubleshooting Section of this Instruction Manual.
5. If the charger does not work, make sure the
ignition/accessory outlet is powering the accessory
outlet. Some vehicles require the ignition switch to be
turned on.
6. Lift the USB cover
(2) to allow access
to one or both of
the USB ports (1).
7. Plug the
USB-powered
device into the
USB Charging
Port and operate
normally.
Note: You can operate two USB devices simultaneously.
Notes: This charger does not support data
communication. It only provides
5 volts/500mA DC power to an external
USB-powered device.
Remember to disconnect the unit from
any power source when it is not in use.
C
14