10
CAUTION:
Do not attempt to unclog the tines by dropping or
tapping the tool on the ground. This can damage the unit.
STORAGE
Remove and clean any debris from the outside of the cultivator and
inside of shroud before storage. See
MAINTENANCE
section.
CAUTION:
DO NOT HANG ON THE SWITCH TRIGGER
Note:
Do not store the tool on or adjacent to fertilizers or chemicals.
Such storage can cause rapid corrosion.
PREVENTING CORROSION
WARNING:
Wear proper gloves and eye protection when
cleaning tool.
Fertilizers and other garden chemicals contain agents that greatly
accelerate the corrosion of metals. If you use the tool in areas where
fertilizers or chemicals have been used, the tool should be cleaned
immediately afterwards.
Wipe all exposed parts with a damp cloth. You may lubricate only
metal parts with a light petroleum based oil. When cleaning, DO NOT
immerse tool in water or spray it with a hose.
ACCESSORIES
Replacement tines (RT400) for use with your tool are available from
your local dealer or authorized service center. If you need assistance
regarding accessories, please call: 1-800-544-6986.
WARNING:
The use of any accessory not recommended for use
with this tool could be hazardous.
THE RBRC™ SEAL
The RBRC™ (Rechargeable Battery Recycling
Corporation) Seal on the LI-ION battery (or battery
pack) indicates that the costs to recycle the battery (or
battery pack) at the end of its useful life have already
been paid by
Black & Decker
.
RBRC™ in cooperation with
Black & Decker
and other battery
users, has established programs in the United States to facilitate the
collection of spent LI-ION batteries. Help protect our environment and
conserve natural resources by returning the spent LI-ION battery to
an authorized
Black & Decker
service center or to your local retailer
for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery.
RBRC™ is a
registered trademark of the
Rechargeable Battery Recycling Corporation.
MAINTENANCE
The cutting blades are made from high quality, hardened steel and
with normal usage, they will not require resharpening. However, if
you accidentally hit a wire fence, stones, glass or other hard objects,
you may put a nick in the blade. There is no need to remove this nick
as long as it does not interfere with the movement of the blade. If it
does interfere, remove the battery from the unit and use a fine
toothed file or sharpening stone to remove the nick.
If you drop the trimmer, carefully inspect it for damage. If the blade is
bent, housing cracked, or if you see any other condition that may
affect the trimmerʼs operation contact your local Black & Decker
Service Center for repairs before putting it back into use.
Fertilizers and other garden chemicals contain agents which greatly
accelerate the corrosion of metals. Do not store the tool on or
adjacent to fertilizers or chemicals.
With the battery removed, use only mild soap and a damp cloth to
clean the tool. Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
