5
SPECIFIC SAFETY RULES
• Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a “live” wire may make exposed
metal parts of the power tool “live” and could
give the operator an electric shock.
• Use clamps or another practical way to secure
and support the workpiece to a stable platform.
holding the work by hand or against your body
leaves it unstable and may lead to loss of
control.
• When not in use, place tool on its side on a
stable surface where it will not cause a tripping
or falling hazard. Some tools with large battery
packs will stand upright but may be easily knocked
over.
SAVE ThESE INSTRUCTIONS
SYMBOLS
The label on your tool may include the following
symbols. The symbols and their definitions are
as follows:
V .....................volts
A .....................amperes
hz ...................hertz
W ....................watts
min .................minutes
or AC .........alternating current
or DC ......direct current
no ...................no load speed
...................Class I Construction
(grounded)
...................earthing terminal
.................safety alert symbol
...................Class II Construction
(double insulated)
.../min or rpm...revolutions or
reciprocation per minute
SPM ................Strokes per minute
..............Read instruction manual before use
...................Use proper eye protection
...................Use proper hearing protection
...................Use proper respiratory protection
FUNCTIONAL DESCRIPTION
1. Variable speed trigger
2. Forward/reverse button
3. Quick-release chuck
4. Magnetic bit holder
5. Charging port
6. Charging indicator
7. Charger
SAFETY WARNINGS AND
INSTRUCTIONS - BATTERIES
•
Do not disassemble or open, drop (mechanical
abuse), crush, bend or deform, puncture, or
shred.
• Do not modify or remanufacture, attempt to
insert foreign objects into the battery, immerse
or expose to water or other liquids, or expose to
fire, excessive heat including soldering irons, or
put in microwave oven.
• Only use the battery with a charging system
specified by the manufacturer/supplier.
• Do not short-circuit a battery or allow metallic
or conductive objects to contact both battery
terminals simultaneously.
• Dispose of used batteries promptly according to
the manufacturer/supplier’s instructions.
• Improper battery use may result in a fire,
explosion, or other hazard.
• Battery usage by children should be supervised.
WARNING:
Never attempt to open the
battery
for any reason. If battery case is cracked or
damaged, do not insert into charger. Do not
crush, drop or damage battery. Do not use a
battery or charger that has received a sharp
blow, been dropped, run over or damaged in any
way (i.e., pierced with a nail, hit with a hammer,
stepped on). Damaged batteries should be
returned to service center for recycling.
SAFETY WARNINGS AND
INSTRUCTIONS - ChARGING
1. This manual contains important safety and
operating instructions.
2. Before using battery charger, read all
instructions and cautionary warnings on battery
charger and product using battery. CAUTION:
To reduce the risk of injury, use charger only
with this product. Batteries in other products
may burst causing personal injury or damage.
