Black & Decker HSVJ415JMFE, Instruction Manual

Page: 6 / 28

6
Removing and clearing the
beater bars
• Depress the beater bar release button
(21) as shown in Figure L.
L
21
• The rotary brush (22) can now be
removed. The end pieces are removable,
allowing you to clear the brushes
from any hair or other debris that has
accumulated during use (Figure M).
M
22
Dry pick up
• For everyday spills of dry material.
• Do not fill the dust bowl (8) beyond the
end of the intake chute.
Optimizing the suction force
In order to keep the suction force optimised,
the filters must be cleared regularly during use.
EMPTYING AND CLEANING
THE PRODUCT
Removing the dust bowl and
filters - Figures N & O
WARNING:
The filters are reusable
and should be cleaned regularly.
• Press the dust bowl release button (9) as
shown in the insert of Figure N, then pull
the dust bowl (8) straight off as shown in
Figure N.
N
• While holding the dust bowl over a bin or
sink, pull out the filter (23) to empty the
contents as shown in Figure O.
O
23
• To replace the dust bowl, push it back onto
the appliance until it clicks firmly into place.
WARNING:
Never use the appliance
without the filters. Optimum dust collection
will only be achieved with clean filters.
Cleaning the Dust Bowl and Filter
• The dust bowl and filter can be washed in
warm soapy water.
• Make sure the filter and the dust bowl are dry
before refitting.
For a more thorough cleaning
• Remove the dust bowl and filter assembly
as described above.
• To separate the plastic filter (24) from the
cloth filter (25), twist the plastic filter in a
counterclockwise direction and lift it off of
the cloth filter as shown in Figure P.
• Shake or lightly brush any loose dust off
both filters.
P
24
25