Black & Decker HSVJ415JMFE, Instruction Manual

Page: 5 / 28

Switching on and off
• To switch the appliance on, depress
the on/off button (1 or 12) as shown in
Figures G and H. The battery indicator
LED will illuminate and vacuum will begin
in the low-speed mode.
• Depress the button a second time to
engage the POWERBOOST mode. The
green LED will also illuminate, indicating
the vacuum is in the higher-speed mode.
• To switch the appliance off, depress the
button a third time.
G
H
POWERBOOST mode
The green LED will illuminate when the
appliance is in POWERBOOST mode. The
vacuum will operate at a higher suction level
to pick up debris that requires more power.
FILTERSENSE
Whenever a filter is blocked and needs
cleaning, the red LED in the handle will
illuminate. Clean dust from filter (See
“Cleaning the Dust Bowl and Filter” section).
Rotary brush
To engage the rotary brush inside the floor
head (16), depress the rotary brush on/off
button (13) as shown in Figure I.
I
Nozzle / Accessories
• A crevice tool (4) is built into the nozzle
(3). Extend the crevice tool as shown in
Figure J, until it clicks in place.
• To shorten the crevice tool, depress the
crevice tool release button (5) as shown
in Figure K and slide the crevice tool into
the nozzle.
• The brush tool (11) can be fitted into the
nozzle for dusting and upholstery cleaning.
J
K
AUTOSENSE
The appliance is fitted with a unique floor
sense feature. It will automatically switch
between low and high mode when you are
vacuuming between a hard floor and a thick
pile carpet.
• To operate the floor sense feature,
depress the power button (1 or 12) once.
The feature will automatically detect the
service that is being vacuumed.
NOTE: Once the power button is depressed
twice, the vacuum will only operate in
BOOST mode.
5