English
-5-
English
After use
• Switch off the appliance before cleaning,
changing accessories or approaching
parts which move in use.
• Switch off and remove the plug from the
socket before leaving the appliance
unattended and before changing,
cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should
be stored in a dry place. Children should
not have access to stored appliances.
Inspection and repairs
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, aging and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be
repaired by an authorised repair agent in
order to avoid a hazard. Do not cut the
power supply cord and do not attempt
to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
This tool is double insulated in
accordance with EN 60335;
therefore no earth wire is required.
Always check that the power supply
corresponds to the voltage on the rating
plate.
To avoid the risk of electric shock,
do not immerse the cord, plug or
motor unit in water or other liquid.
Features
1. On/off button
2. Motor housing
3. Jug cover
4. Chopping blade
5. Blade cover
6. Jug
7. Spout
8. Whisk
Unpacking
• Remove all packaging from the
appliance,
• Clean the appliance before first use.
Use
Warning!
Always place the appliance on a
flat, clean and non-slip surface before
operating it.
Warning!
Never operate the appliance
unless the lid is correctly fitted.
• Remove the motor housing (2) and jug
cover (3).
• Fit the appropriate blade (4 or 8), add the
ingredients and replace the jug cover. Do
not exceed the "Max" marking of the
graduation on the jug.
• Place the motor housing on top of the
jug.
• Press the button (1) to operate the
appliance.
The Chopper will not operate if the jug
cover (3) or the motor housing (2) are
incorrectly fitted.
The appliance will continue to work until the
button is released.
