English
-12-
Note:
Care must be taken when handling
the sharp cutting blades, emptying the
bowl and during cleaning.
Note:
Always handle the chopping blade
(15) by its central plastic part.
Note:
When kneading dough, do not
operate the machine longer than 20
seconds. Wait at least 2 minutes before
operating the machine again.
Note:
When whisking, use maximum
speed.
Citrus Juicer Attachment (Fig E)
• Fit the processor bowl (11) onto the
main unit (3) & assemble the citrus
juicer.
• Cut the fruit in half.
• Connect the appliance to a suitable
electrical supply.
• Rotate the speed control (5) to the
minimum setting.
• Gently press the cut face of the fruit
onto the reamer (32).
• When juicing is completed, turn off the
appliance & wait until all parts come to a
complete stop.
• Remove the reamer & filter.
• Remove the bowl (11) & pour the juice
into a suitable container.
Note:
The citrus juicer should only be
operated at minimum speed.
Centrifugal Juicer Attachment (Fig F)
• Fit the processor bowl (11) onto the
main unit (3) & assemble the centrifugal
juicer.
• Connect the appliance to a suitable
electrical supply.
• Rotate the speed control (5) a medium
setting for soft fruits & the maximum
setting for hard fruits.
• Insert the ingredient into the hole in the
lid. The pusher (36) can be used to guide
the ingredients onto the filter.
• If the juice extractor becomes clogged
during use, turn the processor off and
remove the pulp using the spatula.
Note:
Always use the pusher (36) to guide
the ingredients.
Note:
Never insert fingers in to the hole in
the lid.
Note: Do not use the appliance if the
rotating sieve is damaged.
Shredding, Slicing, Grating & Chipping
Blade Attachment (Fig D)
• Assemble the required blade & fit the
bowl & assembled blade carrier to the
appliance.
• Fit
the
lid.
• Connect the appliance to a suitable
electrical supply
• Rotate the speed control (5) to the
maximum setting.
• Using the pusher (36), press the
ingredients down towards the blade.
Note:
Always use the pusher (36) to guide
the ingredients.
Note:
Never insert fingers in to the hole in
the lid.
Note:
Do not over-fill the bowl
Note:
Care must be taken when handling
the sharp cutting blades, emptying the bowl
and during cleaning.
Summary of Contents for FX1000
