Black & Decker FSM1630 Original Instructions Manual Download Page 6

6

ENGLISH

(Original instructions)

Removing a cleaning pad (Fig. E)

Caution! Always wear suitable shoes when changing the 

cleaning pad on your steam mop. Do not wear slippers or 

open toed footwear.

u

  Return the handle (4) to the upright position and turn the 

steam mop ‘OFF’. 

u

  Place the steam mop on the resting mat and wait until it 

cools down. (approximately five minutes)

u

  Place the front of your shoe onto the cleaning pad removal 

tab (15) and press down firmly.

u

  Lift the steam mop up off the cleaning pad.

Caution! Always place the steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

Attaching the carpet glider (Fig. F)

u

  Place carpet glider on the floor.

u

  Lightly press the steam mop down onto the carpet glider 

(9) until it clicks into place. 

Caution! Always place the steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

Removing the carpet glider (Fig. F)

Caution! Always wear suitable shoes when changing the 

carpet glider on your steam mop. Do not wear slippers or 

open toed footwear.

u

  Return the handle (4) to the upright position and turn the 

steam mop ‘OFF’. 

u

  Place the steam mop on the resting mat and wait until it 

cools down. (approximately five minutes)

u

  Place the front of your shoe onto the carpet glider removal 

tab (16) and press down firmly.

u

  Lift the steam mop up off the carpet glider (9).

Caution! Always place the steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

The Delta Head (Fig. G)

This Steam Mop incorporates a built in delta head which 

enables you to access into tight corners and narrow gaps.

Caution! Always wear suitable shoes when accessing the 

delta head on your steam mop. Do not wear slippers or open 

toed footwear.

u

  Return the handle (4) to the upright position and turn the 

steam mop ‘OFF’. 

u

  Place the steam mop on the resting mat and wait until it 

cools down. (approximately five minutes)

u

  Place the front of your shoe onto the steam head removal 

tab (18) and press down gently.

u

  Lift the delta head (17) up off the steam head (5).

u

  Fit the delta head cleaning pad to the bottom of the delta 

head.

Note: Remove the cleaning pad before re-fitting the delta 

head to the steam head.

u

  To refit the delta head, place the tip of the delta head into 

the steam head then press down firmly ensuring that the 

delta head clicks into place.

Caution! Always place the steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

Filling the water tank (Fig.  H)

The watertank on your steam mop is removable for convi-

enient and easy filling.

This Steam Mop incorporates an anti-calc system to help 

prolong the life of the system.

Note: Fill the water tank with clean tap water.

Note: In areas of very hard water, the use of de-ionised water 

is recommended.

u

  Remove the water tank (3).

u

  Open the filler cap (19) by pressing the release button 

(20).

u

  Fill the water tank (3) with water. 

Warning! Your water tank has a 0.5 litre capacity. Do not over 

fill the tank.

u

  Re-fit the filler cap (19). 

u

  Re-fit the water tank (3). 

Note: Ensure the filler cap is firmly secured.

Use

Important! This unit will kill 99.9% of bacteria & germs when 

used in accordance with this manual and with the micro fibre 

pad fitted and a continuous run time of 90 seconds.

Switching on and off

u

  To switch the appliance on, press the ON/OFF button (1). 

It takes approximately 15 seconds for the steam mop to 

heat up.

Note: When the steam mop is first turned on the water res-

ervoir will glow red. Once the steam mop is ready to use the 

water reservoir will glow blue.

u

  To switch the appliance off, press the ON/OFF button (1).

Caution! Never leave the steam mop in one spot on any 

surface for any period of time. Always place the steam mop on 

the resting mat (8) with the handle (4) in the upright position 

when stationary and make sure the steam mop is turned off 

when not in use.

Caution! Always empty the steam mop after use.

Summary of Contents for FSM1630
























Reviews: