5
ENGLISH
(Original instructions)
tery in the appliance/tool with which it was supplied. Other
batteries could burst, causing personal injury and damage.
u
Never attempt to charge nonrechargeable batteries.
u
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
u
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u
The appliance/tool/battery must be placed in a well venti-
lated area when charging.
Safety of others
u
This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing the use of the appliance by a person responsible for
their safety.
u
Children should be supervised to ensure that they do not
play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
u
Injuries caused by touching any rotating/moving
parts.
u
Injuries caused when changing any parts, blades or
accessories.
u
Injuries caused by prolonged use of a tool. When
using any tool for prolonged periods ensure you take
regular breaks.
u
Impairment of hearing.
u
Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF.)
Electrical safety
Your charger has been designed for a specific voltage. Always
check that the mains voltage corresponds to the voltage on
the rating plate. Never attempt to replace the charger unit with
a regular mains plug.
Symbols on the charger
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Short circuit proof safety isolating transformer. The
mains supply is electrically separated from the
transformer output.
$
The charging base is intended for indoor use only.
Features
This appliance includes some or all of the following features.
1. On/off power switch
2. Removable hose/handle
3. Locking ring
4. Hose
5. Filter cleaning wheel
6. Transparent door
7. LED charging indicator
8. Door latch
9. 2-in-1 combi nozzle accessory
10. Accessory clip
11. Charging base
Fig. A & B
12. Pet brush
13. Crevice tool
Assembly
Mounting accessories (fig. A, B & C)
The 2-in-1 combi nozzle (9) has a brush that can be folded
forward for dusting and upholstery cleaning.
The crevice tool (13) allows for vacuuming in narrow and hard
to-reach places.
The pet brush head (12) is ideal for picking up pet hairs from
cushions and furniture.
u
To fit an accessory press the accessory clip (10) and slide
the accessory onto the handle (2).
u
To remove an accessory, press the accessory clip (10)
and remove the accessory.
When not in use, accessories can be stored on the charger
base (11).
The handle (2) can be removed from the hose (4) allowing the
accessories (9, 12 or 13) to be connected directly to the hose
cuff (14) when required.
To remove the handle:
u
Unclip the handle (2) from the appliance.
u
Rotate the locking ring (3) anti-clockwise to release the
clips.
u
Pull the hose (4) away from the handle (2).
u
Fit the accessory directly to the hose cuff (14).
