background image

SAFETY GUIDELINES 

To prevent injury to the user or other people and property damage, the following 
instructions must be followed. Incorrect operation due to ignoring of instructions 
may cause harm or damage.

Page 6

ALWAYS DO THIS

NEVER DO THIS

ENERGY SAVE

• Your air conditioner should 
be used in such a way that  it 
is protected from moisture. 
e.g. condensation,  splashed 
water, etc. Do not place or 
store your air conditioner 
where it can fall or be pulled 
into water or any other 
liquid. Unplug immediately.

• Always transport your 
air conditioner in a vertical 
position and stand on a 
stable, level surface during 
use.

• Turn off the product when 
not in use.

• Always contact a qualified 
person to carry out repairs. If 
the supply cord is damaged 
it must be repaired by a 
qualified technician.

• Keep an air path of at least 
12 inches. all around the unit 
from walls, furniture and 
curtains.

• If the air conditioner is 
knocked over during use, 
turn off the unit and unplug 
from the power supply 
immediately.

• 

Do not operate your air 

conditioner in a wet room such 
as a bathroom or laundry room.

• Do not touch the unit with 
wet or damp hands or when 
barefoot.

• Do not press the buttons on 
the control panel with anything 
other than your fingers.

• Do not remove any fixed 
covers. Never use this 
appliance if it is not working 
properly, or if it has been 
dropped or damaged.

• Never use the plug to start 
and stop the unit.

• Always use the switch on the 
control panel to start or shut 
off the unit.

• Do not cover or obstruct the 
inlet or outlet grilles.

• Do not use hazardous 
chemicals to clean or come 
into contact with the unit. Do 
not use the unit in the presence 
of inflammable substances 
or vapour such as alcohol, 
insecticides, petrol,etc.

• Do not allow children to 
operate the unit unsupervised.

• Do not use this product for 
functions other than
those described in this 
instruction manual.

• 

Use the unit in the 

recommended room size.

• 

Locate the unit where 

furniture cannot obstruct the 
air flow.

• 

Keep blinds/curtains 

drawn.

• 

Keep the filters clean.

• 

Keep doors and windows 

closed to keep cool air in 
and warm air out.

SAFETY INFORMATION

Summary of Contents for BPACT12 Series

























Reviews: