Black & Decker BIMH326S, Instruction Manual

Page: 12 / 44

Page 12
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
“ADD WATER” indicator is
on.
Lack of Water.
Stop the ice maker, fill water,
and press “ON/OFF” button
again to restart the unit.
“ICE FULL” indicator is
on.
Ice is full in basket.
Remove ice from ice basket.
Press “Select” button for 5
seconds, the unit can make
10 more ice cycles when “Ice”
indicator is on.
Ice cubes stick together.
The ice making cycle is too
long.
Stop the ice maker, and
restart it when the ice blocks
melt. Select the small size ice
cube selection.
Water temperature in inner
tank is too low.
Replace the water.
Temperature of water
recommended at 40°F-90°F.
Ice making cycle is
normal but no ice formed.
Room temperature or water
temperature in inner tank is
too high.
The room temperature
should be 50°F-105°F, water
temperature should be
40°F-90°F.
Refrigerant in cooling system
leaks.
Verify by a qualified
technician.
Pipe in the cooling system is
blocked.
Verify by a qualified
technician.
Troubleshoot your problem by using the chart below. If the unit still does not
work properly, contact BLACK+DECKER customer service center or the nearest
authorized service center.
WARNING
:
Users must never troubleshoot internal components.
TROUBLESHOOTING & WARRANTY