Black & Decker BDEV60, Manual

Page: 6 / 12

Operating your Fan
7
The vents can be adjusted up or down to direct the airflow as desired.
USING THE ICE PACKS
Lift up the water tank. Loosen the screw on the filter cover.
Pull off the water filter cover and remove the water filter.
Place the ice packs in the freezer and make sure that they are frozen thoroughly.
Place the ice pack back into the bottom of the air cooler.
Replace the filter cover and replace the screw on the filter cover.
Completely fill the air cooler with water as per the water filling instructions.
The water consumption rate of the air cooler varies depending on room temperature and relative humidity
Please keep the water level at an appropriate level below the “MAX” level.
Please keep the water level above the “MIN” level when using the cool function.
Place the cooler on a dry, level and sturdy surface.
Ensure the speed control is at OFF position before plugging the power cord into the socket.
Connect the USB data cable to an adapter, then plug it into the back of the unit and the other end into a
100-220 volt AC electrical outlet, Or Connect the USB cable to a computer.
The unit is ready for use.
Power: Press the Power button to turn the unit On.
Speed: With the unit switched on, repeatedly pressing this button selects between High, Medium and Low
fan speed. The selection is shown by the panel lights.
IMPORTANT! NEVER COVER THIS APPLIANCE!
6