7
Imported by:
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
TROUbLEShOOTING
Problem
Possible Cause Possible Solution
• Unit will not start. • Cord not plugged in.
• Plug tool into a working outlet.
• Circuit fuse is blown.
• Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a BlACK+DECKER service
center or authorized servicer.)
• Circuit breaker is tripped.
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip, discontinue
use immediately and have it
serviced at a BlACK+DECKER service
center or authorized servicer.)
• Cord or switch is damaged. • Have cord or switch replaced at
BlACK+DECKER Service Center or
Authorized Servicer.
• Paddle will not
• lock on/ lock off slider is in
• Slide the lock on/ lock off slider
depress.
locked position.
left to the unlocked position.
• Dust is not
• Sandpaper holes do not align. • Use sandpaper with the
being collected.
appropriate hole configuration.
• Dust canister is full.
• Separate dust canister and gently
shake or tap to empty.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BlACK+DECKER help line at
1-800-544-6986.
