10- ENG
Leaks caused by loose fittings or
worn or damaged hoses can result
in injection injuries. DO NOT TREAT
FLUID INJECTION AS A SIMPLE
CUT! See a physician immediately!
PRESSURE WASHER
OPERATING FEATURES
CLICk-N-CLEAN
®
SPRAY LANCE
(Fig. 4)
WARNING:
Do not move the nozzle
to adjust spray while the trigger is
squeezed.
The Click-N-Clean
®
nozzle has three
spray settings. Turn the collar 120° to
the desired position.
S.
The
Low Pressure
Soap
position is
intended for dispen-
sing detergent.
T.
The
High Pressure
Medium Fan Spray
position is intended for
cleaning with high
pressure.
U.
The
High Pressure
Wide Fan Spray
position is intended
for clea ning with high
pressure.
T
U
4
S
NOTE:
The pressure of the spray on
the surface you are cleaning increases
as you move the wand closer to the
surface.
HIGH PRESSURE TURBO SPRAY
LANCE (FIG. 5)
CAUTION:
Do not attempt to move
the nozzle to adjust pressure. The turbo
nozzle is
NOT
adjustable.
The
high pressure turbo nozzle (N) is
intended for maximum cleaning effect.
Keep the spray lance a minimum of 6–8
in (15–20 cm) away from the cleaning
surface at all times.
R
5
USING DETERGENT (FIG. 6–7)
NOTICE:
Use only approved pressure
washer cleaners. Do not use bleach,
chlorine, or any cleaners containing
acids.
NOTICE :
Fill and flush the detergent
tank with clear water after use.
1. Insert the spray lance (B) into the
gun (A) by pushing firmly and
simultaneously twisting a 1/4 of a
turn counterclockwise until locked
into place.
6
A
B
2. Remove the tank cap (V) present
on the back of the machine.
Summary of Contents for 11BDE-210
Page 39: ......
