background image

BKI Fry Warmer 

 

Introduction 

 

 

Introduction 

Congratulations! You have chosen a 

Fry Warmer 

that will give you many years of fine service from the original 

manufacturer, 

BKI

 

The

 BKI 

name and trademark on this unit assures you of the finest in design and engineering — that it has been 

built with care and dedication — using the best materials available. Attention to the operating instructions 
regarding proper installation, operation, and maintenance will result in long lasting dependability to insure the 
highest profitable return on your investment. 
 

 

PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT. If you have 
any questions, please contact your 

BKI 

Distributor. If they are unable to answer your 

questions, contact the 

BKI 

Technical Service Department, toll free: 1-800-927-6887. 

Outside the U.S., call 1-864-963-3471. 

 

This unit must be sealed to the counter after it is installed to conform to NSF Standard 4, 
Item 4.28. (Dow Corning RTV #732 Multi purpose Sealant.) 

Safety Precautions 

Always follow recommended safety precautions listed in this manual. Below is the safety alert symbol. When you 
see this symbol on your equipment, be alert to the potential for personal injury or property damage. 
 

 

Safety Signs and Messages  

The following Safety signs and messages are placed in this manual to provide instructions and identify specific 
areas where potential hazards exist and special precautions should be taken. Know and understand the meaning 
of these instructions, signs, and messages. Damage to the equipment, death or serious injury to you or other 
persons may result if these messages are not followed. 
 

 

This message indicates an imminently hazardous situation that, if not avoided, will result 
in death or serious injury. 

 

This message indicates a potentially hazardous situation, which, if not avoided, could 
result in death or serious injury. 

 

This message indicates a potentially hazardous situation, which, if not avoided, may 
result in minor or moderate injury. It may also be used to alert against unsafe practices. 

 

This message is used when special information, instructions or identification are required 
relating to procedures, equipment, tools, capacities and other special data. 

Safe Work Practices 

 

Beware of High Voltage 

This equipment uses high voltage. Serious injury can occur if you or any untrained 
or unauthorized person installs, services, or repairs this equipment. Always Use an 
Authorized Service agent to Service Your Equipment.

 

Summary of Contents for Fry Warmer HFW

















Reviews: