BK TECHNOLOGIES BKR5000 User Manual Download Page 49

Page: 49 / 71

BKR5000 Portable Radio User’s Manual

- 45 -

radio to transmit.

Automatic

- This setting will display "Busy" momentarily and an alert

tone will sound. The radio will then revert back to receive mode and

monitor the active receive traffic. (carrier mode only)

Busy Channel Conditions

With the PC Radio Editor, each channel is programmed for the

conditions under which the channel is considered busy.
Conditions include:

Off

- Channel is never declared busy.

Carrier

- A busy condition is declared when carrier is present on the

selected Rx frequency.

Non-Qualified

- A busy condition is declared when a non-qualified

signal is present on the Rx frequency. (Non-qualified = Incorrect

CTCSS/CDCSS, talk group or NAC )

Status Symbol

Digital Channels Only

. A busy condition is declared

if the P25 busy status symbol is present on the Rx frequency.

Correct NAC

- A busy condition is declared when receiving digital

signal with the correct NAC, and declared not busy under all other

conditions.

Channel Select [CHAN]

Conventional and Trunked Channels

Channel Selection can be assigned to a button or menu item.

(See Channel/Zone Selection Options for details.)

Cloning [CLON]

Conventional Zones

BKR5000 radios can be set up to send or receive programmed

information from other BK Technologies products via a cloning cable

available from BK Technologies. Cloning can be assigned to a button.

Refer to the cloning cable manual for cloning information.

Summary of Contents for BKR5000








































































Search results

Summary of Contents for BKR5000

Reviews:

Related manuals for BKR5000

Brands by name

Popular brands

BK TECHNOLOGIES BKR5000, User Manual

Search results

Summary of Contents for BKR5000

Reviews:

Related manuals for BKR5000

Brands by name

Popular brands