background image

BK Technologies

- 12 -

Status Indicators 

GPS Enabled

iP

Trunking IP Data Enabled

Alphanumeric Label Options

NOTE: Three radio information lines are programmable with PC Radio Editor.

None 

No information is displayed.

Channel Label 

Alphanumeric label of currently selected channel or 

active scanned channel.

Channel Number

Channel number of currently selected channel or 

active scanned channel.

Channel # and Zone

Currently selected channel numbers and zone.

Date and Time

Displays date and time.

DTMF*

Displays the numeric DTMF tones of received 

signal.

Frequency* 

Operating frequency of currently selected channel 

or active scanned channel.

MDC*

Displays the numeric MDC ID or received signal 

DTMF.

Radio Name

Displays radio name.

Received TGID

P25 Talk Group ID of the radio transmitting the 

message currently being received.

Rx’d Unit ID 

P25 ID of a received digital signal. If the incoming 

ID is programmed in your Unit ID Call List list, the 

associated label will be displayed. During standby 

you radio ID number is displayed.

Rx/Tx Key

Currently selected encryption key.

Rx Picklist 

Selections* 

NAC, TGID or Code Guard currently selected from 

the programmable RX Pick Lists.

Subaudible*

Displays CxCSS value of received signal.

Tx Picklist Selections*

NAC, TGID or Code Guard currently selected from 

the programmable TX Pick Lists.

Summary of Contents for BKR5000








































































Reviews: