BK Radio KNG User Manual Download Page 47

Page: 47 / 76

RELM/BK Radio

Zone Select

Tact OTAR

PRI Scan

ESC ▲ ▼ ENTER

Press the programmed “Menu” button.
Use the Up/Down buttons to scroll to “Tact.

OTAR” and press the enter button.

Key 1

Key 2

Key 3

ESC ▲ ▼ ENTER

Use the Up/Down buttons to select the desired

encryption key. Programmed key labels are

displayed. To view the label and key index press

the “#” button.

Alternatively the key can be selected directly via

the keypad by pressing 1-32.

Pick Key Index



ESC ▲ ▼ ENTER

If the “Key Pick List Target” is programmed (see

“Target Radio Options” under “Key Source Radio

Configuration”) the pick list target screen is

displayed.

Use the Up/Down buttons to select the desired

target key slot. This is the key pick list slot where

the target radio will store the transferred key.
Alternatively the key can be selected directly via

the keypad by pressing 1-32.

Press the enter key to begin the key transfer.

When the key information has been sent the radio will momentarily

display “Key Transfer Successful”.

Key

Transfer

Successful

CANCEL OK

If the radio is not programmed for Tactical OTAR

operation or is on a non-OTAR channel the

display will read “Non-Tact., OTAR Channel”.
Should the key transfer fail for any other reason

a failure message with a two digit error code will
be displayed. (See table)

Summary of Contents for KNG













































































Search results

Summary of Contents for KNG

Reviews:

Related manuals for KNG

Brands by name

Popular brands

BK Radio KNG, User Manual

Search results

Summary of Contents for KNG

Reviews:

Related manuals for KNG

Brands by name

Popular brands