BK Radio KNG Series, Service Manual, Page: 51 / 248

Page 2-36 Service Manual - KNG Portables
operation and Programming
Zone settinGs
To edit the programmable Zone settings, select “Keypad” from the programing menu then select
“Zone” from the sub-menu.
Select Add, Delete or Edit Zone from the Zone menu.
add Zone
When selected, a new zone is added in the next available slot.
Example: If there are seven zones in the radio, the added zone will be zone eight.
Delete Zone
When selected the list of available zones is displayed. Choose the zone you wish to delete.
When a zone is removed all subsequent zones move up one spot. Example: If there are seven
zones in the radio and zone five is deleted, zone six now becomes zone five and zone seven
becomes zone six.
edit Zone
Select “Edit Zone” to change the programmable zone information.
Zone label
Use the keypad to enter a label of up to sixteen characters.
(See keypad character table)
Zone Priority 1 or 2 Channel
NOTE: If system priority channels are programmed, zone priority settings are ignored.
When set to “Off”, the Priority 1 or Priority 2 Channel is designated by the selected zone setting.
When set to “Use Main” the channel selected by the channel knob operates as the priority
channel.
To designate a specific priority channel choose “Select” from the priority channel menu and
choose from the channel list.
Zone tx Priority 1 Channel
If on, the radio will transmit on the Zone Priority 1 channel whenever Priority Scan is on and
there is no system priority 1 programmed.
CHannel settinGs
To edit the programmable Channel settings, select “Keypad” from the programing menu then select
“Channel” from the sub-menu.
Select Add, Delete or Edit Channel from the Channel menu.
NOTE: REFER TO THE COMMAND ZONE OPERATIONS SECTION FOR ADDING OR DELETING
COMMAND ZONE CHANNELS.
DO NOT ADD OR DELETE COMMAND ZONE CHANNELS VIA THE KEYPAD PROGRAMMING
METHOD.
add Channel
Select to add a new channel.
Choose the zone to which the channel is to be added.
Enter a valid channel index number of 1-5000.
NOTE: To access channels above channel sixteen, the radio must be programmed via PC for
keypad channel select or “Channel Select” must be assigned as a button or menu item.