BK Radio KNG Series, Service Manual

Page: 40 / 248

BK Radio Page 2-25
operation and Programming
PaGinG anD Call alert
Conventional two-tone/Dtmf/mDC1200 Paging [mUte]
Conventional Analog Channels
The KNG can be programmed to receive two-tone, DTMF or MDC1200 pages on conventional analog
channels.
receiving a page
Select an analog or mixed-mode receive channel.
Turn on “Voice Mute” from the programmed button or menu item.
When voice mute is activated the
icon is displayed.
The radio ignores all voice traffic until the proper tone sequence is received.
When a proper signal is received the radio will emit an alert tone and allow the audio to pass.
If Auto Reset is programmed, the radio will return to the muted standby mode when the time
conditions have been met.
Call alert Paging [alrt]
Conventional Digital and Trunking Channels
The KNG can be programmed to send and receive Call Alert messages on digital channels.
sending a Call alert
Press the “ALRT” button or open “Call Alert” from the menu.
Select Target Radio
last Call
Select “Last Call” to send the message to radio which you last sent or received a call alert.
Press “Enter” to send the message.
Call list
Selecting “Call List” opens a list alias’ for the pre-programmed Unit IDs.
Select the desired target radio and press “Enter” to send the Call Alert.
Unit iD
Select “Unit ID” to enter the ID of the target radio.
Use the keypad to enter the ID then press “Enter” to send the Call.
receiving a Call alert
When a Call Alert is received, an alert tone will sound and the incoming unit ID or alias is displayed
for approximately 5 seconds.
The top display line line will alternated between the programmed display information and a Call Alert
Received message until.
Select “Call Alert” to reset.