22 BK Radio
To reply to a message on the priority channel,
press the PTT switch and the radio will
transmit on the priority channel. Once activity
ceases on the priority channel, the radio
returns to scan operation.
Priority Mode B
With Switch C (priority) up and Switch B
(scan) down, the radio can receive on the
knob-selected channel while sampling the
priority channel. If the priority channel
becomes active, the Priority Indicator lights
up. The radio changes to the priority channel
and holds for the duration of the transmission.
To reply to a message on the priority channel,
use the keypad to change groups if necessary,
turn the Channel Knob to select the priority
channel, and then transmit.
Priority Mode B with Scan
With Switches B (scan) and C (priority) up, the
radio scans until it locks on to an active
channel. The radio continues to sample the
priority channel while listening to the active
scan channel.
If activity occurs on the priority channel, the
radio overrides the active scan channel,
changes to the priority channel, and holds for
the duration of the transmission.
To reply to a message on the priority channel,
use the keypad to change groups if necessary,
turn the Channel Knob to select the priority
channel, and then transmit.
Once activity has ceased on the priority
channel, the radio returns to scan operation.
Priority Mode C
With Switch C (priority) up and Switch B
(scan) down, the radio samples the fixed
priority channel at the preset rate. If activity
occurs on the priority channel, the radio
changes to the priority channel and holds for
the duration of the transmission.
PR RX SCN
LABEL 3
DPH-CMD Owner’s Manual 23
To reply to a message on the priority channel,
press the PTT switch. The radio transmits only
on the priority channel when Switch C (priority)
is up. Once activity has ceased on the priority
channel, the radio returns to the receive
channel on the Channel Selector knob.
Priority Mode C with Scan
With Switches B (scan) and C (priority) up, the
radio scans until it locks on to an active
channel. The radio continues to sample the
priority channel while listening to the active
channel. If activity occurs on the priority
channel, the radio overrides the active scan
channel, changes to the priority channel, and
holds for the duration of the transmission.
To reply to a message on the priority channel,
press the PTT switch. The radio transmits only
on the priority channel when Switch C
(priority) is up. Once activity has ceased on
the priority channel, the radio returns to scan
operation.
CHANGE THE PRIORITY 1 CHANNEL
The Priority 1 channel can be permanently set
or can be changeable. If the radio has a
changeable priority channel, use the following
steps to make this change:
1.
Slide Switches B (scan) and C (priority)
down.
2.
Use the keypad to change groups, if
necessary.
Turn the Channel Selector
knob to the channel you want to enter as
the new Priority 1 channel.
3. Press
the
[PRI]
key. A short beep sounds
and
PR
appears in the display, indicating
that the displayed channel is now the
Priority 1 channel.
PR
LABEL 3
1
2
3
4
5
6
7
8
9
0
*
#
CLR
FCN
PRI
ENT
Summary of Contents for DPH- CMD
Page 22: ...DPH CMD Owner s Manual 43 NOTES ...
Page 23: ......
