BJ ADAPTACIONES BJ-231, User Manual

Page: 3 / 8

BJ-231 BJ ENABLER PHONE
Page 3
3_Installation
To install the equipment you must make as many connections
from the BJ System enabler (Section 3.1) as connections there
are on the telephone (Section 3.2):
3.1. Installing the BJ System enabler
To install the enabler just connect it to an AC 230V power socket.
The enabler’s connection characteristics are indicated on the
equipment’s label.
3.2. Installing the telephone
To install the telephone follow the device’s User Guide, supplied
with this product. It is important that the telephone’s handle is
correctly fitted to the base of the telephone and the base is
connected to the telephone line.
For proper operation the supply cable supplied with the product
must be connected.
IMPORTANT:
The enabler must be plugged in for the phone to work. Otherwise, the
telephone will be locked. The device’s pilot lamp indicates that the enabler is
connected.
IMPORTANT:
To ensure the numbers stored in the phone’s memory are not deleted if
the line goes down, the 4 rechargeable batteries supplied with the product
should be installed in the compartment at the bottom of the phone. Only
use type AAA 1.5V rechargeable batteries.
Whenever you connect or disconnect the batteries, the phone must be
disconnected from the phone line.