BJ ADAPTACIONES BJ-231, User Manual

Page: 5 / 8

BJ-231 BJ ENABLER PHONE
Page 5
To control the phone from the BJ remote control, you must
program in the different cells of the remote, the RF codes that
allow you to call the memorised numbers.
Below is a list of RF codes that activate the automatic dialling of
the memory positions:
RF Code Action
90
Call number in memory position 0
91
Call number in memory position 1
92
Call number in memory position 2
93
Call number in memory position 3
94 Call number in memory position 4
95 Call number in memory position 5
96 Call number in memory position 6
97 Call number in memory position 7
98 Call number in memory position 8
99 Call number in memory position 9
Once you have programmed the remote, you just have to press
the corresponding button to execute the option. When the
enabler receives the command, it makes the blue LED indicator
flash three times to indicate that the call is being made. Then the
enabler will pick up the phone and dial the number automatically.
You do not need to pick it up first.
• Call via number by number dialling
To dial a number that is not stored in the phone, you must
program on your BJ System remote control, the RF codes
indicated in the following table, which correspond to the numbers
from 0 to 9. In addition, it has codes assigned to the phone’s
control functions.