Step 2: Secure the unit to the back wall using the 4 screws (A) as shown in Fig. B.
Fig. B
Step 3
：
Replace the front cover and secure it with two mounting screws (See Fig. C).
Fig. C
Type 2. Wall Hanging
Step 1: Select the wall location where you want to hang your electric heater. Draw a horizontal line using a
level and mark 4 drill holes for the 4 anchor screws.
Note: The holes are for mounting of heater and it shall be level so that the heater can be mounted properly
and leveled.
Step 2: Drill 4 holes 8 mm (5/16in) in diameter and 43 mm (1.7in) deep on the marked locations. For holes
6
