that do not hit stud, use the supplied wall anchor. Install the wall anchors into the holes and gently tap them
into place with a hammer until the flange of the wall anchor is flush with the wall surface. See Fig. B.
Step 3: Secure the mounting bracket to the wall anchors using the 4 anchor screws and 4 washers as shown
in Fig. C.
Step 4: (1)Find the two mounting screws and remove them. (2)Remove the front cover by pulling it upward
(See Fig. D(1)and Fig.D(2)).
Fig.D(1)
Fig. D(2)
Step 5: Mount the heater on wall using the keyhole slots of the metal bracket at the back of the heater. See
Fig. E.
Make sure that the mounting bracket is completely engaged into the metal bracket at the back of the heater.
7
