Ver. 1.00
- 25 -
XQ-840 Series
5. Detailed Features
5-1 Stand-alone Configuration Mode
• Various modes can be executed using buttons and LED only.
5-1-1 Start Stand-alone Configuration Mode and execute each function
1) The printer mode is set to Printer Setting Mode when the Pause button is pressed
for two seconds while in Print Standby Mode.
2) Both LEDs will change to orange color and the printer will be set to Stand-alone
Configuration Mode.
3) When the printer enters into this mode, the status of LED 1 and LED 2 are changed
sequentially.
4) When the Feed button is pressed at specific LED color combination, the
corresponding printer operation will be selected.
5-1-2 Function List Of Stand-alone Configuration Mode
Sequence
Number
LED 1
LED 2
Printer Operation
Color
Status
Color
Status
1
Green
On
Green
Blink
4 times
Print Configuration Info
2
Orange
Blink
4 times
Print File List
3
Red
Blink
4 times
Factory Reset
4
Orange
On
Green
Blink
4 times
Gap Sensor Auto Calibration
5
Orange
Blink
4 times
B/M Sensor Auto Calibration
6
Red
Blink
4 times
Data Dump Mode
7
Red
On
Green
Blink
4 times
Demo Mode
8
Orange
Blink
4 times
Reserved
9
Red
Blink
4 times
Download Items Delete
* This information can be printed out by printer self-test.
Caution
Contact the customer center if the printer does not enter
stand-alone configuration mode.
