Ver. 1.01
- 49 -
XD5-40d Series
5-7 Data Dump Mode
• This function can be used to diagnose the communication issues when the printer does not
work properly.
In this mode, the received data are not analyzed and printed, instead they are dumped in hex
format without processing.
Turn the printer off and on to recover to the print ready mode.
1) Standard Model
Using stand-alone configuration mode, press the Feed/Cancel button (
)
at sequence number 6 data dump mode (refer to 5-1).
2) LCD Model
In print ready mode the setting menu and move to Tools -> Dump -> Dump Enable and
press Function button 1(
) to run dump mode
* Please refer Tools Menu Explanation (3-6) for more information.
Caution
Contact the customer center if the printer does not enter
data dump mode.
5-8 Factory Reset
• This function is used to factory reset the printer settings.
1) Make sure that media roll has been installed properly.
(1) Standard Model
Use Auto Calibration Mode(depends on the media type) for Factory Reset.
* Please refer Tools Menu Explanation (5-1) for more information.
* The printer will be rebooted automatically.
(2) LCD Model
In print ready mode the setting menu and move to Tools -> Reset and press
Function button 1(
) to reset the printer to Factory default.
* Please refer Tools Menu Explanation (3-6) for more information.
* The printer will be rebooted automatically.
Caution
Contact the customer center if the printer does not enter
factory reset function.