Ver. 1.01
- 48 -
XD5-40d Series
5-6 Media Sensor Manual-Calibration
• Manual-calibration of media detection can be used when the printer cannot detect a media
gap (or black mark) even after auto-calibration has been executed.
Users can calibrate sensor parameters in detail by using the Unified Label Utility-II program
provided by the manufacturer.
The Unified Label Utility-II can be downloaded from the Internet via the BIXOLON website.
(
Please make sure the printer is connected and execute the Unified Label Utility-II program.
Please the Calibration Setting Manager Button after setting the interface type.
1) Select the sensing type and input the label length by millimeter and click
“Check Sensing Value” button. Then
printer starts calibration.
2) Printer will print the scanned values after calibration and the values will appear on the Screen.
3) Optimal sensing values will appear in black bold letters on the left of the utility screen and select one of the
values and click on “Save Calibration”
4) If chosen value does not work properly, please try the other values among the black bold letters.
5) To go back to the initial value, please click on “Cancel Calibration”
Caution
Contact the customer center if the printer does not enter
media sensor manual-calibration mode.