Ver. 1.01
- 42 -
XD5-40d Series
4. Self-test
• This function is supported on standard model(without LCD) only.
The self-test checks whether the printer has any problems.
The self-test checks the following;
1) Make sure that the media has been installed properly.
2) Turn on the power while holding down the Feed/Cancel button
(
)
. The self-test begins.
(It takes about 10 seconds before starting self-test)
3) The self-test prints the current printer configuration information.
4) After the self-test results are printed, a printer enters into print ready mode.
Caution
If the printer does not function properly, contact an authorized dealer.