BIXOLON SMP6200II, User Manual, Page: 56 / 70

Rev. 1.00
- 56 -
SMP6200II
Fig 12-3 Dimensions for design related to clearing the jam using tools
- Make a hole in the outer case wall as shown in Fig 12-2 so that users can press the
button with long and thin tools through the hole.
- Cutter jam will be cleared by pressing the button 3~5 times by inserting a long and thin
tool such as a screwdriver or pen through the hole. When the cutter jam is cleared,
pressing the button will cause idle spinning, in this case stop pressing the button.
Operating load of the push button is about 2.5 kgf.
12-1-2 Designing the structure to clear the condition by pressing the button with finger
Refer to the following when designing the structure to clear the cutter jam by pressing the
push button with
finger.
Fig 12-4 Dimensions of recommended push button lever
- Use the screws to fix the connection to the push button of the printer mechanism.
※ Recommended screw specifications: M2*4 Tapping Screw
- Refer to the dimensions related to the mechanism in Fig 12-5 for installing the push
button lever.