Respiro
36 (48)
Operating Instructions
© Bittium Biosignals 2022
4
TROUBLESHOOTING
Potential issues:
•
Respiro does not start recording: Press the power button first <3 seconds un-
til the blue indicator lights are lit blue and then approx. 8 seconds until the
device vibrates once to start recording. Make sure that the device is charged.
•
Respiro has red light(s) on:
o
If some of the Respiro
device’s indicator LEDs is red see
Tables 4, 5 and
6 below.
Table 4 Respiro common LED indications in error states
Color
Meaning
All LEDs flash red once: Failed recording start. Not enough battery charge or
device internal memory full. Charge device or free device memory.
All LEDs and power button LED red: Device internal error. Press power but-
ton for 12 seconds and try starting the recording again.
All LEDs and power button LED red after power button is first pressed for 12
seconds to switch device off and then pressed again twice to start recording:
Device requires maintenance.
Table 5 Respiro 3 sensor configuration LED indications in error states
3 sensor configuration (1 or 2 RIP belts), 1 LED on for 1 second cycling from left to right
Left LED yellow: Pulse oximeter is connected but finger is not inserted in the
sensor. Check connection.
Left LED red: Pulse oximeter error. Check connection.
Center LED red: Nasal cannula error. Check connection.