12
DS901407-001
DS901407-001
13
BUTTONS FUNCTIONS
STATE
BUTTON
STAND-BY AND
ON HOOK
WAITING FOR
PICK-UP
(receiving a call)
AUDIO
STAND-BY
AND OFF-HOOK
BUTTON
Garage door
lock release
Garage door lock
release
Garage door
lock release
Programmable intercom call 3
(Default: not programmed)
Door lock
release
Door lock
release
Door lock
release
Door lock
release
ADDITIONAL
BUTTON 1÷5
AV1407/051
Special
function 2÷6
Special
function 2÷6
Special
function 2÷6
Programmable intercom call
4÷8 (Default: not programmed)
ADD-ON
AV1407/051
Automatic door
lock release
Automatic door lock
release
Automatic
door lock
release
Automatic door lock release
OPTIONAL PROGRAMMING FOR ADDITIONAL FUNCTIONS
The following programming operations are needed after testing the basic operation of the system, only if are
required.
INDOOR STATION INTERCOM FUNCTION
In the B-Twin system, various buttons can be programmed for the intercom call function.
One button can be programmed to call another user in the column or to call an indoor station in parallel. All
indoor stations of the called user will ring in the fi rst case. Only the specifi cally programmed indoor station
will ring in the second case.
INTERCOM FUNCTION BETWEEN VARIOUS USERS
Go to the indoor station to be programmed as caller (indoor station A).
Hold the door opener button pressed and pick up the handset. The indoor station A outputs a tone to
indicate that programming mode is in progress.
‘a’
BEEP!
Press the button to be programmed. The indoor station will output a confi rmation tone.
‘a’
BEEP!
•
•
•
Go to the user that the button will call (user B) and press the door opener button. The indoor stations will
be beep to indicate that they have been programmed.
Alternatively, go to a calling station and press the calling button of user B. The indoor station being
programming (A) will beep to indicate that it has been programmed. The indoor stations of user B will ring
when this occurs. Ignore this call.
‘b’
BEEP!
Hook up the handset of indoor station A. It will beep to indicate exit from programming mode.
Check programmed function: release the handset A and press the programmed button. Check that all indoor
stations of user B ring and check audio.
You will need to program indoor station B to call A to make the opposite call possible.
The other functions listed in the “Buttons functions” table will not be lost if the buttons are programmed
for this function because the intercom call is made with the
handset off-hook
.
INTERCOM FUNCTION IN THE SAME APARTMENT
Go to the apartment station to be programmed as caller (indoor station C1).
Hold the door opener button pressed and pick up the handset. The indoor station C1 outputs a tone to
indicate that programming is in progress.
‘c1’
BEEP!
Press the button to be programmed. The indoor station C1 will output a confi rmation tone.
‘c1’
BEEP!
Go to the indoor station that the button will call (apartment station C2) and press the door opener button.
The indoor stations C1 and C2 will be beep to indicate that they have been programmed.
•
•
•
•
•
•
•
•