3
DS902010-007
Abb. / Fig. 3
Abb. / Fig. 4
Thank you for having chosen a quality product of Bitron Home, an Urmet Group brand. Bitron Home
products have been specifically designed for use with the QIVICON platform for which they are approved.
QIVICON enables you to manage and control you smart phone in a really easy way: applications for PC,
tablet and smartphone let you manage all connected devise, at any time and from anywhere.
INSERT OR REPLACE THE BATTERIES
In the original packaging the batteries is not inserted into the device yet. In order to mount or to replace the
batteries, open the device by shifting the bar (
Fig. 1
). Insert the batteries respecting the polarity (
Fig. 2
)
and close the device by turning the bar to its initial position.
SET-UP
In order to set-up this device you need to have a QIVICON home base which is equipped with a QIVICON
ZigBee® radio stick. The home based needs to be set up and you need a valid user account. For further
information, please refer to http://www.qivicon.de/support.
1.
Remove plastic cover which protects the battery during transport on the back of the device (
Fig. 1
).
2. Log on at
Mein QIVICON
(www.qivicon.de/login). Go to
Gerät hinzufügen
and select the
manufacturer
Bitron Home
. Then choose your device (
Fig. 2
).
3.
Follow the connection wizard’s instructions.
If you wish to associate the device to a different home base, e.g. in case you need to replace the home
base, repeat steps 2 and 3.
FUNCTIONS
By pressing the function key shortly, backlight will be enabled for 10 seconds and the current temperature
and humidity measurements will be transmitted to the home base. Normally measurements are transmitted
each 10 minutes or immediately, in case temperature varies by 2% or humidity varies by 10%.
Jumper JP1 is located inside the device (
Fig. 5
). By default, JP1 is in position “
C
” which stands for
centigrade. You can change the jumper to position “
F
” to display temperature in Fahrenheit.
Fig. 5
