Pulse Oximeter
Operation
51
7.6.4 System time (
Clock
)
The function sets the date and time of the unit. For a precise analysis of the stored monitoring
data, it is necessary to set the device time always correctly.
ATTENTION!
The user will need to adjust the time from summer to winter and vice versa manually!
1.
Starting from the main menu, call:
Configuration
Clock
2.
Select the first digit to be modified.
3.
Adjust the number.
4.
Repeat this sequence for each
number to be modified.
5.
Confirm this setting with
ACCEPT.
NOTICE!
The clock time does not run while
setting it. For that reason it makes
sense to set the clock time to a later
point in time, and then at precisely
that point in time accept the time
and date.
Fig. 53: Setting the system time
If you try to accept an invalid date
(e.g. 30.02.13), the device responds
with the following message:
"
Date is not correct
".
In that case no new date or time is
set.
7.6.5 Device information (
Product Info)
By selecting menu
Product Info
you can call up the most important device settings on to the
display:
–
device S/N and software version
–
the version of the Masimo circuit board and its product identification
–
the DSP and microcontroller-versions
–
the perfusion sensitivity setting
–
the signal averaging time setting
NOTICE!
The displayed information is read-only.