- 13 -
T17+ Server Installation Guide
5. Administering Your Server
2.
For
Keep Settings
:
■
Select the check box to keep your current settings (default).
■
Clear the check box to reset the server to default settings.
3.
Click the
(Browse)
button and navigate to the upgrade file. Select the upgrade file, then click
Flash image
. A message
appears notifying you if the T17+ firmware can be upgraded and if yes, will then proceed to flash the image.
4.
When the upgrade is completed, the following message appears:
5.
Click one of the following options:
■
Reboot
- to restart the server with the new firmware.
■
Go Back
- to continue mining with the current firmware. The server will load the new firmware next time when it is restarted.
5.3 Modifying Your Password
To change your login password:
1.
In
System
, click the
Administration
tab.
2.
Set your new password, then click
Save & Apply
.
5.4 Restoring Initial Settings
To restore your initial settings
1.
Turn on the server and let it run for 5 minutes.
2.
On the controller front panel, press and hold the
Reset
button for 10 seconds.
Resetting your server will reboot it and restore its default settings. The red LED will automatically
flash once every 15 seconds if the reset is operated successfully.
