User Guide
Dialer
Receiving SMS messages
SMS messages are downloaded automatically as soon as your communications equipment informs
the application that messages have been received. If the message received has high priority, its
content is displayed automatically, otherwise you have to use the
Envelope
button to read it (see
SMS, page 25).
Logs
The application records dates, durations and caller identifiers as the dialer is used, dividing them into
three categories: missed calls, incoming calls and outgoing calls. You can look up details of these
lists at any time by pressing the
Logs
button. This will take you to a tabbed box listing the calls logged
by category and, under the
Durations
tab, the various cumulative totals recorded, with a facility for
resetting the counters.
Remote network access
The dial-up networking
button enables connections to be made to remote services and to start
up applications associated with them (see page 29 ).
Warning!
On most equipment, the fact of connecting to the Internet prevents the Dialer from being used.
You can use either the red
key or the dial-up networking
button to close the dial- up
networking session again.
Setup
Accessing setup
Before setting up the application's dialer function, select the communications equipment and the
mobile telephony service provider using the
Options
command on the
Tools
menu. Next, access
dialer configuration by clicking on the
Dialer
link.
Configuring the answering machine
You can add the number of your answering machine in the
Network operator
selection dialogue box
(
Tools
>
Options
menu). It will be dialed automatically if you leave the stylus resting on the
"1" key of the dialer.
P2-17
