User Guide
Dialer
2.3.6 DIALER
The
Dialer
module simulates the operation of a mobile phone in your PDA. It enables you to:
y
Make calls in various ways:
-
by directly selecting an entry in the
Contacts
folder of your PDA.
-
by selecting from a
Fast calls
list you will have pre-programmed.
-
by entering a number directly using the keyboard.
-
by redialing one of the last 10 numbers dialed.
-
using the missed calls log if the caller has not withheld his/her number.
y
Receive calls showing, where possible, the last and first names of your caller and playing a
tune identifying the
Contacts
category to which your caller belongs.
y
Reject incoming calls.
y
Save outgoing, incoming as well as missed calls in call logs.
y
Send digits with the call to enable navigation across most voice servers.
y
Save the number of your message system for speed dialing.
y
Check microphone and speaker volume for certain items of equipment.
y
Send and receive SMS messages.
y
Access the
Remote network access
module to connect to the Internet using a single button.
y
Read signal strength and battery level of your mobile directly when external equipment is
being used or of your PDA for an internal card.
y
Request the dialer to be called automatically on starting up the application.
Warning!
Certain dialer functionalities may be disabled due to incompatibility with the communications
equipment.
Accessing the dialer
Starting from the main interface, select the
Tools
menu then the
Dialer
option or click
. The dialer
initializes your communications equipment then displays signal strength and battery level as well as
the name of your service provider. The keyboard will be enabled once the initialization stage is
complete.
P2-14