BitaTek IT-6000 Series, User Manual

Page: 68 / 72

to cancel the installation of ActiveSync.
4. Once ActiveSync is installed, it will attempt to connect to the
device; allow it to fail on the first attempt.
5. Reboot your PC.
6. Open ActiveSync.
7. Select File > Connection Settings from ActiveSync’s menubar.
8. Enable the Allow serial cable or infrared connection to this
COM port check box. Verify that Infrared Port (IR) is
selected in the pull-down list below the checkbox. To close the
window, click the OK button.
9. Remove the device from the dock. Verify that the unit is
turned on.
10. Insert the device into the dock.
• The Infrared Device Indicator in the Host PC’s system tray will
appear and indicate that it has discovered a new device.
• Within a minute, the ActiveSync window should appear
attempting to connect to a new device.
11.
If ActiveSync does not connect within two minutes try the
following:
• Open the ActiveSync window if not already open.
• Remove the IT-6000 from the dock and then reinsert it.
• After the Infrared Device indicator has recognized the new
device, go to the ActiveSync window.
12.
Select File > Get Connected and ActiveSync looks for a mobile
device.