www.BISSELL.com
12
1
Maintenance: Cleaning Machine After Use
First, fill the clean water
tank with warm tap water
and then empty it all to
rinse. Then fill again with
warm tap water and return
the tank to the machine.
Twist cap back on tightly.
To flush and rinse machine:
Turn the machine on and
press the spray trigger for
15 seconds while making
back and forth passes on a
section of carpet. Release
the spray trigger and suck
up the water.
See page 11 to clean the
water that was just sucked
up from the dirty tank.
Empty the clean water tank
and let dry before storing.
Wipe your machine’s
exterior with a soft cloth.
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
Maintenance: Cleaning the Nozzle
2
1
3
4
If pet hair or debris
become clogged in
the nozzle, it can be
cleaned out of the
nozzle with the nozzle
clean out tool.
Turn off and unplug
the machine from the
grounded outlet.
Remove the nozzle from the foot: flip the
accessory hose door open and lift up on
the nozzle and accessory hose door.
Return the nozzle back
to the foot of the
machine. Line up the
three hooks on the
nozzle to the bottom of
the foot. (see arrows for location)
Rotate the nozzle up and click into place.
Close the accessory hose door.
Hold the nozzle and insert the nozzle clean
out tool into the thin slot, on the end of
the nozzle that touches the floor. Clean
until free of pet hair or debris.
EN
