Fill the water tank
1.
Recline the upper handle by pressing on pedal
and lay it down to access the tank.
2.
Remove the tank from the base of the
machine by lifting the tank carry handle.
3.
Carry the 2-in-1 tank to the sink. Rotate the
handle forward to unlatch the lid. Lift off and
set the lid aside.
4.
Fill up the bladder with clean hand hot
(140°F/60°C MAX) tap water.
*Do not boil or
microwave water as it can destroy the bladder.
5.
Replace the top of the tank by matching the
lid and tank edges. The tank handle must be
in the forward position in order to replace lid.
Rotate the handle to latch the lid in place.
NOTE: Remember to secure the lid and test
to make sure it is secure before picking up
the tank.
6.
Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handle back into
upright position.
Fill the formula tank
1.
Lift the formula tank up and out of the
machine base.
2.
Fill the formula tank by first unscrewing the
cap and insert. Always use genuine BISSELL 2X
formulas to maximize cleaning and for the safety
of your machine. Fill water to water line and
then fill up to formula line with BISSELL formula.
Place formula tank into the slot in the side of the
machine for a snug fit.
NOTE: Make sure grommet is properly seated
to avoid leaking.
Choose the SmartMix setting
Simply choose one of the 3 settings
• Heavy Traffic
• Normal
• Water Rinse
and the ProHeat Pet will adjust the right amount
of cleaning solution to mix with the clean water.
Operations
www.BISSELL.com
9
SmartMix
Dial
1.
3.
5.
1.
2.
4.
6.
2.
WARNING
To reduce the risk of fire and electric shock
due to internal component damage, use
only BISSELL cleaning fluids intended for use
with the deep cleaner.
