Operations
Empty the tank
1.
Turn the power switch off. Remove the water
tank from the base using the tank carry handle.
Carry the tank like a bucket to a utility sink or
outside where you will dispose of the collection
water. Remove the top of the tank by rotating
the handle forward to unlatch lid and lifting lid
off tank.
2.
Empty collection water from bottom of tank.
NOTE: You may notice hair & debris deposits
on the carpet or in the tank that were loosened
by the cleaning action (especially with newer
carpets that have never been deep cleaned
before). This debris should be picked up and
thrown away.
3.
After each use, remove and rinse the lint
screen located on the tank lid.
4.
Refill the 2-in-1 tank by referencing “Fill the
water tank” on page 9. Remember to secure the
top of the tank by rotating the handle and test
to make sure it is secure before picking up.
5.
Return 2-in-1 tank to the machine.
NOTE: Always check the level of cleaning
formula in the formula tank at the same time,
and refill as needed
Rinse (optional)
Rinsing is an optional step that can be done
during the cleaning process by switching to the
water rinse setting, or it can be done after the
carpeted area has been cleaned.
1.
Simply choose the water rinse setting on
the SmartMix dial, and follow the same path
as you did for cleaning, taking care to do a
forward (wet) stroke by depressing the trigger,
a backward (wet) stroke, and a forward and
backward (dry) stroke, releasing the trigger.
Continue this until the water you see coming
up the nozzle is clear.
www.BISSELL.com
11
1.
1.
3.
4.
2.
5.
