9
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1.
Turn power switch OFF ( 0 ). Unplug the
machine and wrap the power cord.
2.
After emptying the 2-in-1 water tank, rinse it out
at a faucet with running hot tap water, taking
care to clean underneath the heavy duty bladder,
and all around it. Clean out lint trap.
3.
Replace the 2-in-1 water tank on the machine.
4.
Any loose hair or debris can be pulled from
the brush roll if desired and thrown away.
5.
Wipe the machine’s exterior with a soft cloth.
6.
After carpet is dry, vacuum again to remove
hair and fuzz.
Machine storage
Once your cleaning is complete, make sure the
2-in-1 water tank is emptied and rinsed out. Put
the unit away in a closet or basement for the next use.
Note: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components
and void the warranty.
M
aintenance and care
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
T
roubleshooting
Reduced Spray OR No Spray.
Possible cause
Remedies
1.
Bladder may be empty
1.
Turn power off; Refill bladder with clean
hot tap water.
2.
The lint screen may be clogged
2.
Clean out lint screen.
3.
2-in-1 tank may not be seated properly.
3.
Turn power switch OFF; remove tank and
reseat tanks.
4.
Pump may have lost prime.
4.
Turn power switch OFF; after 1 minute turn
ON and depress spray release trigger.
ug120-4007_1694-8806_507.indd 9
ug120-4007_1694-8806_507.indd 9
6/4/07 2:47:47 PM
6/4/07 2:47:47 PM
