background image

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

O

perations

8

special on-board tools (continued)

crevice tool:

 Use in tight narrow spaces.  

extension Wand:

 Use with desired attach-

ment for a longer reach.

hose Wand:

 Use with desired attachment 

for a longer reach or for cleaning hard to 

reach places.

turbobrush:

 Use rotating brush action for 

small flat areas such as cushions and 

beds. 

note: press gently down and pull 

towards you in a raking motion. too 

much pressure will cause the brush 

to stop rotating. 

  CAUTION:   

The rotating floor brush continues to rotate while tools are in use. To reduce the risk of injury 

from moving parts, always move the cleaner with the carrying handle. Always place vacuum 

cleaner on the floor with handle in upright position when using tools. Never place your fingers 

under the cleaner when it is running. Never place powerfoot on furniture or uneven surfaces. 

Do not place vacuum cleaner close enough to objects to pull them into rotating brush.

Tip:

Hair, string and small objects can block  

the vacuum hose or tools. Check them  

occasionally for obstructions.

Dusting Brush/ 

Upholstery Tool

Extension Wand

Crevice Tool

Hose Wand  

Base

Hose Wand

TurboBrush

Summary of Contents for PowerGroom 92L3R





















Reviews: