w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
6
handle positions
press the handle release pedal, located
on the lower left side of the vacuum, with
your foot to place your vacuum into one
of three cleaning positions.
1. upright –
For storage and above floor
cleaning with tools.
2. normal cleaning –
Press handle
release pedal once. Position used for most
household floor cleaning tasks.
3. low cleaning –
With the vacuum in
normal cleaning position, press handle
release pedal again. Use for reaching
under low furniture such as tables, chairs
or beds.
height adjustment
there are five height settings available
for various floor surfaces. turn the dial
on the foot of the cleaner to the desired
setting.
lowest setting –
For low pile carpet or bare
floors. To pick up debris it may be necessary to
move up one setting.
Medium settings –
For medium pile carpet.
high setting –
For high pile and most shag
carpet.
note: for optimal carpet cleaning
performance, adjust to the lowest
practical setting. if your cleaner is
difficult to push, adjust to the next
higher setting.
if the dial is difficult to turn, tilt the
cleaner back slightly to take the weight
off the foot while turning.
NOTICE:
For above floor cleaning, the floor
brush will continue to rotate, but is
raised above floor. To prevent carpet
damage, do not lean on the vacuum
or let the powerfoot tilt forward.
CAUTION:
To avoid personal injury and to
prevent the cleaner from falling
when cleaning stairs, always
place it at the bottom of the
stairs.
Tip:
Before cleaning under low furniture,
check area first for objects that might
harm the unit or block the vacuum hose.
1.
2.
3.
1.
Height Adjustment Knob
