www.BISSELL.com
9
Replace the Brush & Belt
Unplug vacuum, turn
over and unscrew 6
Philips-head screws to
remove bottom cover.
Lift roller straight out.
Inspect belt, replace if
it appears damaged.
If the belt is not broken, remove
roller from inside of looped belt.
Inspect Brush Roll by placing it
on its end and spin. The Brush
Roll should spin freely, multiple
times by one flick. If it doesn’t,
replace Brush Roll.
Replace the Brush Roll and belt
by looping the belt over the
motor shaft and the Brush Roll.
Line up the end caps and pull
the brush forward into place.
This will stretch the belt.
Once the Brush Roll is installed,
place the bottom cover back on
and replace the screws.
Cleaning the Separator
Remove the separator
by twisting to the left
(counter-clockwise), then
pull it out through the
bottom of the tank. Rinse
and dry all sections of Dirt
Tank with paper towel.
Press the Tank
Release Button
and pull handle
to lift Dirt Tank
away from
vacuum.
1
2
End Cap
Belt
1
2
3
4
5
