background image

T

roubleshooting

Vacuum cleaner difficult to push

Possible causes  

Remedies

1.

  Incorrect height adjustment 

1.

  Adjust powerfoot to correct height setting

Visible dirt escaping from cleaner

Possible causes  

Remedies

1.

  Dirt container full 

1.

  Empty dirt container

2.

  Filters missing or installed incorrectly 

2.

  Check inner and outer circular filter and 

  

 

post-motor filter for correct installation

3.

  Dirt container installed incorrectly 

3.

  Pull out and re-insert dirt container correctly

4.

  Filter cup installed incorrectly 

4.

  Remove dirt container and make sure filter 

  

 

cup is full attached

Other maintenance or service not included in the manual should be performed by an 

authorized service representative.

Thank you for selecting a BISSELL product.

If you should happen to need assistance during assembly or operation, call 1-800-237-7691.

Please  do  not  return  this  product  to  the  store.             

For any questions or concerns, BISSELL is happy to be of service. 

Contact us directly at 1-800-237-7691.

For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Services

1-800-237-7691

 

Monday - Friday   

8 a.m. — 10 p.m. ET

Saturday 

 

9 a.m. — 8 p.m. ET

Or write:

BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids  MI 49501
ATTN: Consumer Services

 

Or visit the BISSELL website - 

www.bissell.com

When contacting BISSELL, have model number of cleaner available.

Please record your Model Number: ___________________

Please record your Purchase Date:  ___________________

NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of 
a warranty claim. See Warranty on page 16 for details.  

B

ISSELL Consumer Services

14

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

ug110_4018_6585_1207.indd   14

ug110_4018_6585_1207.indd   14

12/19/07   10:05:02 AM

12/19/07   10:05:02 AM

Summary of Contents for Powerforce Bagless Turbo 6585 Series

















Reviews: